Sunday, November 4, 2012

Laser cut 'Recording Sign'

Thanks once again to FabLabMcr I have used the laser cutter to make a 'Recording' light for my son's studio.

It was really easy to make. Its basically a red / clear acrylic sandwich with paper in the middle as the filling. The letters are in a stencil font that is cut from the red layer.

This is then screwed to the front of a wooden frame, that contains a main lamp holder with a 15W compact fluorescent in it. Holes are drilled into the top to let the heat escape.

Here are the PDF files for laser cutting.

Clear Layer.

About the Author
These are my books. Click on the image below to find out more about them.

No comments: