tag:blogger.com,1999:blog-5416726460697111362.post6019461257361920178..comments2024-03-13T11:50:16.986-07:00Comments on Dr. Monk's DIY Electronics Blog: Raspberry Pi and Breadboard (Raspberry Leaf)Simon Monkhttp://www.blogger.com/profile/11397717497833049913noreply@blogger.comBlogger30125tag:blogger.com,1999:blog-5416726460697111362.post-44785472663460222192015-01-16T23:02:34.722-08:002015-01-16T23:02:34.722-08:00This is a T-type breakout kit used for extending t...This is a T-type breakout kit used for extending the GPIO interface on Raspberry Pi to breadboard.Anonymoushttps://www.blogger.com/profile/01203525333999787831noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-34717666600965499262014-04-08T22:33:01.985-07:002014-04-08T22:33:01.985-07:00Thanks. That worked out great with photo paper. Fo...Thanks. That worked out great with photo paper. For those having size issue just use a caliper to measure it. I got it correct on the 4th print.Anonymoushttps://www.blogger.com/profile/04409590039388840021noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-30835115769922527502014-04-08T22:32:09.672-07:002014-04-08T22:32:09.672-07:00Thanks. That worked out great with photo paper. Fo...Thanks. That worked out great with photo paper. For those having size issue just use a caliper to measure it. I got it correct on the 4th print.<br />Anonymoushttps://www.blogger.com/profile/04409590039388840021noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-75868118872267019932013-08-23T10:36:12.015-07:002013-08-23T10:36:12.015-07:00I took your leaf and added it to a full page print...I took your leaf and added it to a full page printout with some other usefull pinouts for other boards like the BeagleBone Black and ATMEGA328. All the other pinouts were designed to fit into the lid of an altoids tin. They are available in SVG and PNG at http://cs.wisptech.com/altoids.phpUnknownhttps://www.blogger.com/profile/09291973277409016849noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-63510380500415971852013-03-24T21:21:22.444-07:002013-03-24T21:21:22.444-07:00Thank you. Normally amazing ideas are like yours, ...Thank you. Normally amazing ideas are like yours, simple.Anonymoushttps://www.blogger.com/profile/05959702614047222514noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-21806567865651212032013-03-17T07:38:36.518-07:002013-03-17T07:38:36.518-07:00Thank you! I am on a Windows 8 PC. I had a hard ti...Thank you! I am on a Windows 8 PC. I had a hard time getting the pins to print at the right scaling. The trick that finally worked was to save the image from the HTML to the desktop and then insert it into a Word document. Word prints it correctly.ChristopherCantrellhttps://www.blogger.com/profile/01376736362218964655noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-23918770967377259492013-02-26T14:59:08.899-08:002013-02-26T14:59:08.899-08:00I use Quick2Wire / WiringPi libraries, so I've...I use Quick2Wire / WiringPi libraries, so I've edited your V1 pdf to have the Q2W/WiringPi pins on it - they're in mauve.<br /><br />Link: https://dl.dropbox.com/u/17766973/raspberry%2Bleaf%2BWiriingPi%2BR1.pdf<br /><br />Nice idea :-)Unknownhttps://www.blogger.com/profile/01601860514352520932noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-30755990730354391112013-02-25T09:04:33.343-08:002013-02-25T09:04:33.343-08:00thanks for sharing this very useful ideathanks for sharing this very useful ideaNoon Knighthttps://www.blogger.com/profile/12458094540275545656noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-30759133988753991882013-02-24T17:26:31.570-08:002013-02-24T17:26:31.570-08:00With a small change you could remove it without re...With a small change you could remove it without removing wires: <br />Don't actually put it trough the holes but you just make sure it fits around them and make a small vertical cut on the bottom. Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-81181227731592249332013-02-22T05:52:52.370-08:002013-02-22T05:52:52.370-08:00I've made a few different versions of these le...I've made a few different versions of these leafs, and IMHO the easiest way to make the holes is the old "sharp pencil and a lump of blu-tack" technique that I remember from school.<br />I found with any other technique it was too easy to rip the paper, because the holes are so close together.Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-10270120750388965272013-02-20T06:03:40.762-08:002013-02-20T06:03:40.762-08:00I have updated the image for the Rev 2 boards for ...I have updated the image for the Rev 2 boards for the correct GPIO mapping. Thanks for all the feedback everyone.Simon Monkhttps://www.blogger.com/profile/11397717497833049913noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-64910806515849717202013-02-20T04:39:59.176-08:002013-02-20T04:39:59.176-08:00Simon - the "N/C" pins are actually *no ...Simon - the "N/C" pins are actually *no longer* DNC pins - even on the older Revision1 RPi boards (Eben's said so!)<br />They actually have the same connections as the Revision2 pins.<br /><br />And as somebody's already mentioned, some of the pins (specifically, those you've labelled as "0", "1" and "21") have different numbers on the Revision2 boards.<br /><br />Full details are on the wiki page http://elinux.org/RPi_Low-level_peripherals<br /><br />And also see the comments on http://www.raspberrypi.org/archives/3307Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-72981644989044547382013-02-20T04:05:54.307-08:002013-02-20T04:05:54.307-08:00Simon - I hope you don't mind. I re-did the la...Simon - I hope you don't mind. I re-did the layouts for the rev1 and rev2 boards in Inkscape.<br />Added pin numbers as some guides talk about connecting specific pins rather than their GPIO designation as well CE0 and CE1 for pins 24 and 26.<br /><br />https://picasaweb.google.com/lh/photo/k3vN3HsxB-XmIiVFzzn8jdT5abReFwIL0MDnXkIiG4E?feat=directlink<br /><br />Looks like your Raspberry Leaf is really catching on.<br />The ultimate KISS solutions.Winkleinkhttps://www.blogger.com/profile/10921617680353539604noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-65080361128722328822013-02-19T13:45:20.259-08:002013-02-19T13:45:20.259-08:00for who wants to use it with a case, so that it ca...for who wants to use it with a case, so that it can be kept inside when closed: http://imgur.com/Rj0gOMoFrancescohttps://www.blogger.com/profile/14787962536278698192noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-51427375321662208732013-02-19T13:25:23.252-08:002013-02-19T13:25:23.252-08:00This is genius! Such a simple, but incredibly use...This is genius! Such a simple, but incredibly useful idea. Thanks so much for posting it (and going the extra mile for the rev1/rev2 and PDFs). Tip for those printing the PDF version - make sure your PDF viewer doesn't "scale to page" or "autorotate and fit" or anything like that when printing.tycenhttps://www.blogger.com/profile/08750279676347782426noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-80805976585417889602013-02-19T12:42:21.324-08:002013-02-19T12:42:21.324-08:00I might be wrong,
but I believe that
ON REV2 Pin ...I might be wrong,<br />but I believe that <br />ON REV2 Pin 21 is now pin27...<br /><br /><br />See page 10 of:<br />http://www.element14.com/community/docs/DOC-51727/l/assembled-gertboard-user-manual<br />Anonymoushttps://www.blogger.com/profile/00404932361010533860noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-56581186203986473382013-02-19T09:35:22.124-08:002013-02-19T09:35:22.124-08:00I have put PDF versions up too. Hopefully they wil...I have put PDF versions up too. Hopefully they will be a lot easier to print at the correct size.Simon Monkhttps://www.blogger.com/profile/11397717497833049913noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-31097212768950442512013-02-19T09:23:40.467-08:002013-02-19T09:23:40.467-08:00You have correctly labelled the version 1 pins as ...You have correctly labelled the version 1 pins as "DNC" - however you labelled them as "GND" for the version 2 board. I would suggest that you leave them as "DNC" even if they are currently connected to ground. If the A2 or B3 come along and change these, some people might be unhappy. :-(Anonymoushttps://www.blogger.com/profile/07569428735193688329noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-76235474238335628212013-02-19T08:09:06.521-08:002013-02-19T08:09:06.521-08:00This comment has been removed by the author.WeGoSmarthttps://www.blogger.com/profile/16498986253441122746noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-6633096175595752872013-02-19T06:10:50.447-08:002013-02-19T06:10:50.447-08:00I also tried printing but found getting the scalin...I also tried printing but found getting the scaling right a bit fiddly so I dragged the R1 and R2 images into Inkscape and scaled the pitch to 2.54mm.<br />Then I made up a UK A4 page with 8 each of the R1 and R2 identifiers on it.<br /><br />Link to it on Google+ https://plus.google.com/u/0/107414156853105102585/posts/BGKhCHzMiHgWinkleinkhttps://www.blogger.com/profile/10921617680353539604noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-68289736403222071192013-02-18T23:12:52.183-08:002013-02-18T23:12:52.183-08:00Awesome! Thanks for sharing!Awesome! Thanks for sharing!klmhttps://www.blogger.com/profile/14072504227928085053noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-12816506948735174292013-02-18T16:42:24.523-08:002013-02-18T16:42:24.523-08:00Thank you for the share. Please consider alternat...Thank you for the share. Please consider alternatively offering as PDF to make printing at such places as Kinkos pain free.<br /><br />:)<br /><br />@all<br /><br />if you love your Pi, but at least one for a youth in your extended family. That's love.<br /><br />Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-45393277997589072722013-02-18T14:18:37.323-08:002013-02-18T14:18:37.323-08:00Well, although its a rev 1, its safe for rev1 and ...Well, although its a rev 1, its safe for rev1 and rev 2 (I have both).<br /><br />If I made it for Rev2 and you put it on a Rev 1 board, some pins wouldn't have the expected supply. <br /><br />Tell you what, I'll make a Rev 2 tomorrow, then folk can take their pick!Simon Monkhttps://www.blogger.com/profile/11397717497833049913noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-40650724614877302512013-02-18T13:14:49.507-08:002013-02-18T13:14:49.507-08:00This is a great idea. Thanks for doing it!
I can&...This is a great idea. Thanks for doing it!<br /><br />I can't help noticing that you have the revision 1 pin names attached to a revision 2 board, though.<br /><br />Any chance of an alternate version with the proper revision 2 pins on it?Frank Carverhttps://www.blogger.com/profile/10122946282768021916noreply@blogger.comtag:blogger.com,1999:blog-5416726460697111362.post-87638471025891254142013-02-18T12:44:22.840-08:002013-02-18T12:44:22.840-08:00This comment has been removed by the author.Waltzing with Widgetshttps://www.blogger.com/profile/08736931371925628891noreply@blogger.com